Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Any way to disable TC without CDL?

  1. #1
    Join Date
    Feb 2008
    Location
    Cleveland Qld
    Posts
    253
    Total Downloaded
    0

    Any way to disable TC without CDL?

    Hi Guys,

    I have 2000 D2 TD5 and find that TC tends to cause vehicle to get bogged in loose sand, especially when towing camper.
    I do not have a CDL, so is there any way to disable TC in these conditions?

    Cheers..B

  2. #2
    Join Date
    Jan 1970
    Posts
    1,151
    Total Downloaded
    0
    Yank out the fuse! Or wait until it overheats then it will self disable!

  3. #3
    Join Date
    Feb 2007
    Location
    Perth
    Posts
    3,919
    Total Downloaded
    0
    My experience is also that traction control in very loose sand does not help but getting the cdl working will transform the way it performs in those conditions.
    2024 RRS on the road
    2011 D4 3.0 in the drive way
    1999 D2 V8, in heaven
    1984 RRC, in hell

  4. #4
    Tombie Guest
    Even without the CDL...

    If you're getting too much TC 'intervention' then your tyre pressures are too high.

    Also, TC requires a different style of driving...

    But no, never had issues with TC in any type of sand...

    And as mentioned above- CDL makes a huge difference..

    You dont need to disable the TC

  5. #5
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    This is worth a read, and backs up Tombies comments.

    Offroading Myths - Don't Spread Them! | 4WD Book & 4X4 News

    14. Traction control is no good in sand because it slows the vehicle down.

    The rationale here is that as a wheel spins the traction control brakes it, which slows the vehicle, then the opposite wheel spins and so on. That's not the case. Firstly, this is often a case of confusing stability control with traction control. But even if it isn't, think about what's happening. If a wheel is spinning then it's not doing much good on the traction front, and clearly its opposite number has more traction otherwise it would be spinning too. It may be that the driver has fallen for Myth 6 too. Anyway, so, slowing the spinning wheel and transferring torque TO the wheel with greater traction will actually help maintain momentum. And as soon as the two wheel speeds on an axle are the same the traction control stops its braking, and won't restart unless there's a signfiicant difference in wheel speed across an axle. This is a perspective myth, and while I cannot claim to have driven every vehicle in sand I have driven over 20 traction-controlled vehicles in soft sand and observed more on trips I have led, researched how the system works and in some cases where traction control has been a "problem" I have been able to trace the cause to unlocked centre diffs, driver error, stability control or overly high tyre pressures.

    UPDATE: I have, of late, seen this claim made about the Defender TD5 and Defender 'Puma'. I own a Defender TD5 and have driven it fully loaded, and sometimes with a trailer in many, many sand conditions, everything from desert dunes to hard-packed beaches to the softest talc-like sand you can imagine. Never has traction control been an problem. I also have driven Defender Pumas in sand and again, no problem. And I've led quite a few trips with both types of car and Discovery IIs - no issues observed there either. So I don't understand where this myth is coming from and can only think it is some form of driver error. If anyone has more information please let me know.

  6. #6
    Join Date
    Feb 2008
    Location
    Cleveland Qld
    Posts
    253
    Total Downloaded
    0
    Quote Originally Posted by Tombie View Post
    Even without the CDL...

    If you're getting too much TC 'intervention' then your tyre pressures are too high.

    Also, TC requires a different style of driving...

    But no, never had issues with TC in any type of sand...

    And as mentioned above- CDL makes a huge difference..

    You dont need to disable the TC
    Hi Tombie,

    I drop pressure to 18PSI on both vehicle & camper. What is the best way to drive with TC active on loose sand? Any tips appeciated.
    Cheers..B

  7. #7
    Join Date
    Jan 1970
    Posts
    1,151
    Total Downloaded
    0
    Having driven rather a lot on sand with TC I find it most useful, as in all cases with TC, to have an even and reasonably constant throttle and don't back off when you bog down. TC needs revs to work properly. 18PSI is your friend.

  8. #8
    Join Date
    Nov 2008
    Location
    Roleystone, Perth
    Posts
    891
    Total Downloaded
    0
    Quote Originally Posted by bruiser69 View Post
    Hi Guys,

    I have 2000 D2 TD5 and find that TC tends to cause vehicle to get bogged in loose sand, especially when towing camper.
    I do not have a CDL, so is there any way to disable TC in these conditions?

    Cheers..B
    If you have 2000 TD5 then you should have CDL internals. It may not be activated, but if all else fails, get under there with a 10mm spanner turn it on and experiment with the TC off.

    cheers
    Nick

  9. #9
    Join Date
    Feb 2007
    Location
    Perth
    Posts
    3,919
    Total Downloaded
    0
    Quote Originally Posted by bruiser69 View Post
    Hi Tombie,

    I drop pressure to 18PSI on both vehicle & camper. What is the best way to drive with TC active on loose sand? Any tips appeciated.
    Cheers..B
    Go lower on tire pressure. Experiment. 18psi on really loose sand is too high IMO. The things which are important, in order of importance.

    1 tire pressure
    2 cdl
    3 traction control

    Opinions differ on traction control in sand but I think it is the least important of the three things anyway.
    2024 RRS on the road
    2011 D4 3.0 in the drive way
    1999 D2 V8, in heaven
    1984 RRC, in hell

  10. #10
    Join Date
    Feb 2008
    Location
    Cleveland Qld
    Posts
    253
    Total Downloaded
    0
    Quote Originally Posted by bruiser69 View Post
    Hi Tombie,

    I drop pressure to 18PSI on both vehicle & camper. What is the best way to drive with TC active on loose sand? Any tips appeciated.
    Cheers..B
    I generally go as fast as I can on these soft beach exits, but once momentum is lost (which happens very fast when towing) vehicle runs out of grunt & bogs. I have tried using low range to get more torque but then can't get the momentum to travel over the sand before wheel spin bogs it.
    Would enabling Sport mode on auto and selecting 2nd gear be any advantage in low range?
    Cheers..B

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!