2004 D2a models

Were those phat rails standard on that model?

.Just had to brave the mossies & cold to check mine,but all good,build 04,vin MY04.....

Was getting worried it might be build 04,vin MY03:angel:

Phat roof rails were put on the 'platinum' edition models. They usually came with grey alloys and light guards as well.

Quote:

---

Originally Posted by scarry

So you can have one with a BUILD date,that is the plate rivetted on the panel at the left front (on a D2),as being /03 for example,but the vehicle is MY 04?
Also i have seen a couple around with thicker looking roof rails,but haven't been able to get a good look at them.Are these the HSE MY 04 or 03?

---

The LR model years are roughly September to August. So you could have a MY04 built 09/03.

Quote:

---

Originally Posted by OffTrack

The LR model years are roughly September to August. So you could have a MY04 built 09/03.

---

fingers crossed!;)

Quote:

---

Originally Posted by Pedro_The_Swift

fingers crossed!;)

---

The VIN will answer all ;)

Quote:

---

Originally Posted by mattyg

Phat roof rails were put on the 'platinum' edition models.

---

Yep, Platinum edition from 2003 had tubular roof rails, and I have also seen them on the occasional HSE.

They are quite often referred to as tubular G4 rails, cost about $350 plus postage from the UK.

Quote:

---

Originally Posted by sniegy

Mundy,
That's why the VIN is so important on these/all European vehicles. There are always changeover points throughout the VIN. Yours maybe!? An early 04MY & the sensor was still fitted?
Service wise we ONLY go by VIN.
Sales wise, sales people will always go by registration date, which in Australia could 3-4 months prior to the next model year.
Hence why you thought? That you have an 03MY, but if the VIN says 04MY, then it is an 04MY.
Cheers

---

Had a look a the compliance plate and it was manufactured April 04 and there's a 4 in the VIN. Not sure why I thought it was an MY03 now but I assumed there was a difference between a model year (ie when first designed/made) and the actual year of manufacture ie a model year might apply to vehicles made for several years. No matter; sounds better to have an MY04!

D2 production finished in late May 04 so an April build is pretty late.

There are a few things updated on the 04MY. The SLABS ECU is a later revision than the one in the 03MY.

Quote:

---

Originally Posted by Mundy

Had a look a the compliance plate and it was manufactured April 04 and there's a 4 in the VIN. Not sure why I thought it was an MY03 now but I assumed there was a difference between a model year (ie when first designed/made) and the actual year of manufacture ie a model year might apply to vehicles made for several years. No matter; sounds better to have an MY04!

---

Date on compliance plate is not manufactured or build date.Build date is on plate front left of vehicle in front of airbox.Small plate rivetted onto panel.
If compliance date is 04/04,build willbe earlier,maybe even late 03,even though VIN says it is MY04.I would guess your build is either01 or 02 of 2004.

For example,mine is not here so i can't check it,but i think it is built 02/04,compliance is 05/04,vin is definitely 2004.

Quote:

---

Originally Posted by Pedro_The_Swift

fingers crossed!;)

---

Quote:

---

Originally Posted by OffTrack

The VIN will answer all ;)

---

cant find the compliance plate,, seems they needed that space for the gas compliance plate:confused:,, however the vin on the gas plate has a 3 where there should be a 4,, surely a typo:ohyes::unsure::no2::BigCry: