Over the past few months while repairing and replacing bits on the Disco 2 , I have sorted the dash area, radio not fitted correctly and the bundleof associated wiring free to move about. Later after replacing the head liner , internal A and C plastics , I notice that with newer clips the plastic on plastic rattle was gone. The most obvious reduction in noise came with the new windscreen. It seems that the snorkle and exterior trim was correctly fitted so at speed they could move about. Nice and quiet now.
have a good one :D ken :wasntme:
MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
1996 D1 300TDI GONE
08 ford ranger c/c
WRECKING DISCOVERY 2
PM ME FOR WHAT YOU ARE LOOKING FOR
Me too, well, mine too, I took the cover off and got a kettle of hot water,poured the water slowly over the catch springy bit then held it out straighter so as when it cooled it had more tension in the cover.
Buz gone!
Cheers
Mike
There seems to be something in every corner and most bits of the dash that rattles in mine, as well as a particularly annoying metallic buzz just off idle...
dash rattle,, seems to be at the ends?
2nd row seats, only the single remains but i get a rattle out of both sides, door locks? or belt retractor maybe?
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.![]()
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
My dash has an annoying squeak somewhere in the middle, top half,, left hand side near the windscreen. But only when it's above 35c outside.....meh it can stay like that.
Jason
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks