my MudPod install

I just mounted the controller for USI-160 into the Mudpod.

I couldnt wire the USI-160 Directly to a carling switch which was my original intention, so i had to make some modifications.

1. remove the traxide micro toggle switch
2. wire in 4 lengths of wire - found out i only need the two furthest from the LED

3. connect 2 wires to the carling switch.

https://www.aulro.com/afvb/images/im...013/04/344.jpg

4. Drill hole in side of Mudpod to show LED indicator

https://www.aulro.com/afvb/images/im...013/04/345.jpg


Only a quick post - will add more details later

I decided to get on board after my boost pressure tube split due to the sun weakening the plastic.

Mounted the turbo boost pressure gauge, MadMan EMS, Carling switches for Roof Lights and LED Light Bar, Winch In/Out and Winch Power, ACE switch (for Rough Road and Unlocked modes) with LED indicator above and black missile switch cover over it to protect it from someone playing with it, and USB outputs.

https://www.aulro.com/afvb/images/im...015/01/627.jpg
https://www.aulro.com/afvb/images/im...015/01/628.jpg

For some reason in the pictures it looks a bit crooked, but it's not.

I intended to have the boost gauge and EMS the other way around but accidentally cut the wrong hole first before realising.

Hi twr7cx,

Nice job - can you explain the function of the ACE switch.

onebob

Quote:

---

Originally Posted by onebob

Nice job - can you explain the function of the ACE switch.

---

No, not really other than in unlocked mode ACE doesn't function and in Rough Road mode it lessens the effect of ACE.

Check out http://www.aulro.com/afvb/verandah/1...-modifier.html which is the bible thread on it.

Night time illumination:

https://www.aulro.com/afvb/images/im...015/01/629.jpg