Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: coolant type

  1. #1
    Join Date
    Jan 2012
    Location
    Brisbane
    Posts
    287
    Total Downloaded
    0

    coolant type

    Hey Guys, Looking thru various post about coolant, Ive checked mine and its green like Nulon type, not red, will this do any harm

    cheers

    ken

  2. #2
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,517
    Total Downloaded
    0
    not in the short term.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  3. #3
    Join Date
    Jan 2012
    Location
    Brisbane
    Posts
    287
    Total Downloaded
    0
    mmm not in the short term, I would have thought any good coolant would be ok, Ive used the green stuff in all sorts of veh, never had any probs, please explain the error this will cause me, I wanna make sure the coolant is correct for the TD5 and does this mean that a drain and flush is needed

    cheers
    ken

  4. #4
    Join Date
    Jul 2010
    Location
    Hunter Valley NSW
    Posts
    750
    Total Downloaded
    0
    Found the answer here...

    The OAT anti-freeze is designed specifically for the protection of the aluminum system. It provides a microscopic barrier, a thin gaseous film, as protection for the system components. This film “bonds” to the aluminum surfaces it comes in contact with, providing protection against corrosion. When conventional anti-freeze is introduced into the system, this protection is washed away and chemical reaction corrosion begins almost immediately. Remember that the use of long life anti-freeze as a replacement for conventional anti-freeze does not extend the recommended system service requirements as set forth by the manufacturer. The “extended” life or protection ability of the long life coolants only applies to new vehicles in which the coolant is installed initially and then maintained by regular system service.

    From
    Aluminum Radiators at Radiators.com

  5. #5
    Join Date
    Jan 2012
    Location
    Brisbane
    Posts
    287
    Total Downloaded
    0
    thanks guys for the heads up, so any anti freeze that says suitable for allow engines is not entirely correct

    cheers

  6. #6
    Join Date
    Jan 2008
    Location
    Grange, Adelaide
    Posts
    699
    Total Downloaded
    0
    I have green Nulon (ethylene glycol) and only top up with the same. Why? Because that how I got the car 5yrs ago.

    Ideally you should have the red OAT in it but (from what I have learnt over the past 5 yrs from this site) if you change from green back to red you'll cause a few weaknesses in the cooling system to reveal themselves. ie stick with what you have.

    And if you do decide to change, never never change back without a full coolant flush through all components, (block, hoses, radiator). If they mix it'll cause a reaction and cause faster corrosion.

  7. #7
    Join Date
    Jan 2012
    Location
    Brisbane
    Posts
    287
    Total Downloaded
    0
    thanks simon I will do same also due to already having green coolant

    cheers

    Ken

  8. #8
    It'sNotWorthComplaining! Guest
    if you never had a system leak before using the green coolant and do a full flush and then use OAT, you will soon see any weak spots in the system. That OAT squeezes out of the most minute gap after it's eaten any scale inside the system. I will leak from hose clamps, theromstats, I even manged to come out of what looked like a perfect whelsh plug on my engine that had never leaked before.
    You will find little trails, drop marks of highly visible pink where it dries

  9. #9
    Join Date
    Dec 2010
    Location
    Brisbane Bayside
    Posts
    361
    Total Downloaded
    0
    Ditch the Oat. As has been said it will leak where ever it gets the chance. I had a leak between the oil cooler and engine block on the wifes Td5, flushed the Oat crap out and replaced with Nulon green glycol which by the way is perfect for alloy rads and heads, it stopped the leak, saved myself about 6 hours labour. There are no problem s with using it just the difference of a year in change interval. Ive had green glycol nulon in my other Td5 for years no problem s and no leaks..

    BIG O
    1999 D2 Td5 Auto ACE
    2003 D2 Td5 Auto

  10. #10
    Join Date
    Jun 2010
    Location
    Hobart, TAS
    Posts
    246
    Total Downloaded
    0
    I agree with Big O. I have been running the green in my Td5 for 3 years and no signs of a leak from anywhere. As for corrosion I will take my chances.

    I worked on cars for 10 years and yes did see some corrosion under hoses mainly eg thermostat housings heater pipes etc. I have never replaced any major components like cyl heads or radiators due to corrosion caused by green coolant.

    Everyone has a different spin on coolants/oils etc. There is that many opinions it is hard to know what the right thing to do is.

    If you really want to be a rebel mercedes do a nice yellow, and even blue coolant

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!