Page 2 of 8 FirstFirst 1234 ... LastLast
Results 11 to 20 of 79

Thread: D2 front recovery points???

  1. #11
    Join Date
    Jan 2008
    Location
    Grange, Adelaide
    Posts
    699
    Total Downloaded
    0
    Back to the original question, to accurately help, need to know you have a bull bar fitted or do you have the original front plastic bumper? It makes a big difference in what you can fit as the aftermarket recovery brackets are too short to protrude below the original bumper. I have the std bumper, couldn't afford a bull bar so fitted a second tow point and run a bridle.








  2. #12
    Join Date
    Jan 1970
    Location
    Gold Coast Queensland Australia
    Posts
    6,469
    Total Downloaded
    0
    give outcast [grover69] or philco a pm, they are both still around.

    if you have an original bumper you can neatly slot the plastic to have the recovery points visible and accessable to put a shackle into.
    Safe Travels
    harry

  3. #13
    Join Date
    Jan 1970
    Location
    Gold Coast Queensland Australia
    Posts
    6,469
    Total Downloaded
    0
    Quote Originally Posted by simonl8353 View Post
    Back to the original question, to accurately help, need to know you have a bull bar fitted or do you have the original front plastic bumper? It makes a big difference in what you can fit as the aftermarket recovery brackets are too short to protrude below the original bumper. I have the std bumper, couldn't afford a bull bar so fitted a second tow point and run a bridle.







    do you have a better picture of what the shackles attach to?
    Safe Travels
    harry

  4. #14
    Join Date
    Jan 2008
    Location
    Grange, Adelaide
    Posts
    699
    Total Downloaded
    0
    The shackles attach through a sling to two std tow points (one shown in 1st pic). Because of the 2nd attachment point (essential) you have sufficient for most reasonable recoveries. There will be plenty of debate here as their always is with recovery points. I use a 8mm Dynamica sling - the orange rope in pic below, rated 6.6 tonne (at splice) and I figure if 1 shackle (WLL 2T each) or tow point gives way then the sling will slip through the recovery strap and fail safe. No other shackles go into this recovery, and definitely not to join two recovery straps.



    Edited below to add more pics I just found.






  5. #15
    scarman Guest
    I have a ARB bar on the front, I just need a good recovery point to match it.

  6. #16
    Join Date
    Apr 2010
    Location
    South Melbourne
    Posts
    894
    Total Downloaded
    0
    I installed the Philco ones as they match the ARB bar setup very well. Link here:

    http://www.aulro.com/afvb/verandah/1...ery-point.html

    Cheers
    Simon
    Cheers

    Simon
    2003 D2a TD5, ACE, SLS, Vienna Green.

  7. #17
    Join Date
    Jun 2008
    Location
    Alstonville NSW
    Posts
    469
    Total Downloaded
    0
    I am joining a group for a Simpson trip and "the group" decided that every one needs rated front recovery points directly attached to the chassis. To date I have relied on ARB doing their sums when they added the recovery points to the front of the Bull Bar but will bend to the wishes of the group. To that end I have just ordered a set from Outcast Offroad. I expect that they will reduce approach angle and will probably only leave them on for this trip but will post back if I like them enough to keep them.

  8. #18
    Join Date
    May 2007
    Location
    Australia
    Posts
    2,827
    Total Downloaded
    0
    Quote Originally Posted by simonl8353
    The shackles attach through a sling to two std tow points (one shown in 1st pic). Because of the 2nd attachment point (essential) you have sufficient for most reasonable recoveries. There will be plenty of debate here as their always is with recovery points. I use a 8mm Dynamica sling - the orange rope in pic below, rated 6.6 tonne (at splice) and I figure if 1 shackle (WLL 2T each) or tow point gives way then the sling will slip through the recovery strap and fail safe. No other shackles go into this recovery, and definitely not to join two recovery straps.

    Edited below to add more pics I just found.
    As you say there will be some debate here, but for actual "off road" recovery, no way I'd hook up to your points.
    Some light assistance..... maybe, depending on the circumstance.

    LR make it very clear that these points are for "on road" recovery only i.e breakdown pull onto flat top.

    Those points are not up to off road recovery and despite your efforts to have a failsafe, still have a strong potential for a shackle or tow point to injure or kill.

    Cheers

  9. #19
    Join Date
    Jan 1970
    Location
    Melbourne, AU
    Posts
    839
    Total Downloaded
    0
    Quote Originally Posted by John W View Post
    I am joining a group for a Simpson trip and "the group" decided that every one needs rated front recovery points directly attached to the chassis. To date I have relied on ARB doing their sums when they added the recovery points to the front of the Bull Bar but will bend to the wishes of the group. To that end I have just ordered a set from Outcast Offroad. I expect that they will reduce approach angle and will probably only leave them on for this trip but will post back if I like them enough to keep them.
    Given the ARB bull bar is directly bolted to the chassis and the tow points are integral with the bar, how will tow points on the chassis be any different? unless someone in your 'group' is going to do the engineering calcs. Also the recovery points on the market I've seen don't carry any formal ratings including the set I bought from ARB some years back.

    I certainly wouldn't be anywhere near someone using the factory fitted tie down point - even doubled up - for recovery rather than towing.
    _________________________
    1996 D1 V8 - gone
    2002 D2 Td5 ES- gone but still running elsewhere
    2013 D4 SDV6 HSE - gone
    2023 Defender 110SE D300

  10. #20
    Join Date
    Jan 2010
    Location
    Adelaide
    Posts
    601
    Total Downloaded
    0
    Doesn't the ARB bar bolt on to crush cans?, I would have thought in a snatch recovery these would possibly stretch and deform.
    I personally wouldn't use my bar for any recovery, and I fitted 4x4 intelligence recovery points to mine and am very happy with them

Page 2 of 8 FirstFirst 1234 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!