TORQUE CONVERTER LOCK UP
At vehicle pull away and during gear changes, the torque converter will allow a certain amount of slip to occur between the crankshaft drive plate and the input shaft of the gearbox. Incorporated into the design of the automatic transmission system used on Discovery Series II is a lock-up feature, where the TCM will activate the torque converter lock-up solenoid. Discovery Series II will lock the torque converter in all gears, whereas on pre 1999 Range Rover this can only be activated in third and fourth gears. When activated, the torque converter lock-up clutch will be engaged and no slip will be allowed. Direct drive through the torque converter will be provided in this condition.
Bookmarks