Shuttle valve switches replaced

I had the 3 amigo's for "a number" of years, finally replaced the switch pack, AND did option 2 at the same time. Helps if you have small hands!

3 amigos cleared instantly and have not reappeared.

Like others, I'd suggest option 2 in tandem with the switch pack replacement.

Quote:

---

Originally Posted by clubagreenie

Pull the ABS sensors, they get a build up on them, especially as they are magnetic if there's any metal particles in there they'll stick to it. Once I did it my faults reduced to virtually nil.

---

There was a recall done to replace the SLABS ECU to solve issues with metallic particles on the ABS sensors causing spikes in sensor readings. Perhaps your D2 missed out on having it done? If it has been changed it will have an SRD000070 ECU installed.

It's also extremely unlikely ( as in: not a chance) that a fault code relating to SVS issues will be solved by cleaning ABS sensors. If you are going follow that method of trouble shooting you may as well bin the Nanocom and invest in a pack of tarot cards.

Totally agree if the fault is Only showing SVS failure forget the wheelsensors.

Where is the SLABS and will it have the No. on it?

Loose green yellow wire in abs elec connector block in engine bay can cause intermitent fault. Push back into block. Option b hooks into this wire,effectively bypassing connector and issue. Fixing the ext connector is easier...If pcb connector in abs mod is crook then option a, b etc is reqd