Printable View
Ken. Have a good look at the winch cradle when you pick it up from TJM. (I got mine from Geebung as well)
They supplied mine with a big patch of flaking powder coat and then had a whinge when I told them that I wouldn't accept it.
Then, all they did was powder coat it again over the existing which made it that couple of mill to wide to easily fit between the chassis rails.
Needless to say I wasn't a happy chap.
thanks Matty for the heads up, do they fit up ok otherwise, I assume they bolt thru were the bullbar bolts are, what about the front of the tray does that bolt to the back of the bullbar
cheers
ken
Couple of pics showing the cradle sans winch.
Cheers
Matt
Only bolts through the chassis rails. Mine was slightly bent when I got it and consequently was an absolute pig of a job to fit but didn't have the time to get them to rectify. If they have a quality control issue make sure it is all true when you pick it up.Quote:
Originally Posted by frostyblue
Thanks guys pics were very clear, ill will most def look before handing cash over
Well picked up cradle today and i have to say its a serious bit of kit, very well made and about 8mm thick pressed and welded, really fits like a glove, i now glad i didnt go the home made route.
Cheers
Ken
Yeah, it's pretty well bombproof. Would stiffen the whole front end up as it braces between the 2 chassis rails and the first crossmember.
well its all fitted up, very happy with fitting, really snug, just gotta move No plate up a bit and secure control box and were done
Mine was the same, **** poor i reckonQuote:
Originally Posted by mattyg
Cheers
well i must be a lucky man cause mine was blemish free and fitted like a c#*k in a sock