Page 3 of 3 FirstFirst 123
Results 21 to 29 of 29

Thread: Idiots and rattle guns

  1. #21
    zedcars Guest
    Guys
    In my shop wheels have to be torqued by hand.
    Yes we use a 3/8th air tool to spin the nuts down, but the torque wrench comes out to secure the wheels. That is shop policy!

    Maybe I am a bit more conscious of this and its consequences than many!
    For 14 years I was a zone rep and service engineer for Leyland trucks. At one stage my job was to support truckers running from the UK to Iran and beyond. My patch was Leibniz to Tabriz in Iran.

    Back in the 70's the wheel of choice was the 10 stud cup 'n cone type nut/wheel. If you didn't keep an eye on it as a trucker it would come apart and totally wreck the hub and studs/wheel etc.

    I can remember a "delightful exercise" putting a UK trucker back on the road in Bucharest after he lost his wheels. Since I had no studs/nuts nor wheel for a Scammell Crusader I scrounged a Mercedes truck wheel, filed the studs to fit the Leyland axle with a BFH and got it to Istanbul where we did a "propah job!

    If I have the inclination I have an entertaining story of losing a front wheel on a Pinzgauer;, after the owner had driven it some 300 miles mentioning a slight noise. I get in it to test and the bloody wheel shot of at 50 mph on test.
    My luck
    Cheers Dennis
    zedcars

  2. #22
    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    1,801
    Total Downloaded
    0
    Wheel brace that came with my LR which I think is genuine issue.. it folds in half, you can undo at full length but only do up at half. Theres a clue right there. I trust the amount of leverage LR provided - as tight as i can be bothered with my arms and then stand on it to finish. No need for a torque wrench or rattle guns.

    I must remember to check em whenever back from the garage, if I was stranded with locked on wheels - I would go NUTS! ( yeah i said it )

  3. #23
    Join Date
    Jan 1970
    Location
    Melrose SA
    Posts
    2,838
    Total Downloaded
    0
    All this and no mention or acknowledgement of torque tubes.
    Despite the urban myth that every Tyre fitter in the country is a retard and uses a rattle gun to destroy our cars things are not always as they seem.
    In the Tyre shops that I have been associated with the use of color graded torque tubes prevents what you are all talking about.
    That said some fool with the wrong color tube will do exactly what you are saying.
    The worst experience I had was when they didn't do the nuts up.

  4. #24
    zedcars Guest
    Torque tubes were fashionable and still are to a certain extent.

    But up 'n over here the torque wrench seems to be the norm these days in the multistate chain tyre shops. Like Discount Tires & Big O Tires, the J/C or W/O print out often states the wheel nut torque etc, and the foreman goes around and writes in the box provided on the W/O the torque he set the wheel nuts before handing over the car to the customer.

    The very litigious nature of the US car repair business almost dictates it especially in California.
    Dennis
    zedcars

  5. #25
    Join Date
    Dec 2007
    Location
    Sydney, you know. The olympic one.
    Posts
    4,853
    Total Downloaded
    0
    What defines a torque tube?

    I once had a fitter tell me that the anodised color coded tubular sockets with the plastic to stop it scratching your bling that are now fashionable were torque sockets and when they stopped it was tight. I agreed but he couldn't tell me how tight.

  6. #26
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,517
    Total Downloaded
    0
    they are basically an extension bar or long socket that has a slip clutch in them that lets go at a predetermined torque limit.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  7. #27
    zedcars Guest
    Here you are:-
    For your continued rattle or windy gun pleasure accessory list!
    http://www.torquestick.com/images/torque_chart.pdf
    Dennis
    zedcars

  8. #28
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Quote Originally Posted by zedcars View Post
    Here you are:-
    For your continued rattle or windy gun pleasure accessory list!
    http://www.torquestick.com/images/torque_chart.pdf
    Dennis
    zedcars
    these are a great idea, but nothing beats the feel of hand tools for final torque.

    jc

  9. #29
    Join Date
    Jan 2010
    Location
    Wallan VIC
    Posts
    23
    Total Downloaded
    0

    Angry

    Hi everyone

    Funny reading this as just had nrma out to remove my lock nut as had a flat tyre... huge amount of effort due to rattle gun madness at the tyre fitters.

    Do they not get the request do lock nuts up by hand not a rattle gun?????? I will throw my lock nuts away anyway.... key is damaged and so are nuts from over tightening...

Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!