Results 1 to 4 of 4

Thread: D2 tail light wiring

  1. 1st December 2012, 09:15 PM #1
    Nova
    Nova is offline Master Subscriber
    Join Date
    Oct 2010
    Location
    Near Adelaide
    Posts
    102
    Total Downloaded
    0

    D2 tail light wiring

    Hi All,

    I have a D2 and have recently gotten hold of some D2a updated tail lights (high and low mounted ones). I am looking for a wiring diagram to find out which wires I need to swap around to move/swap the indicators and reverse lights. I have a copy of rave but can't find it at the mo so that doesn't help.

    I am assuming there is a plug somewhere back up the loom that I can get to and swap the required wires around.

    Cheers,
    Nova
    Reply With Quote Reply With Quote
  2. 2nd December 2012, 11:30 AM #2
    OffTrack's Avatar
    OffTrack
    OffTrack is offline YarnMaster
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    You best get searching for the RAVE CD.

    To work this out you'll need 2000MY and 2003MY wiring diagrams and the Electrical Library Pdf.

    The next connector downstream is above the b-pillar and behind the headlining. As for which connections need to be swapped - as they say in the classics "this is left as an exercise for the reader".

    cheers
    Paul
    Reply With Quote Reply With Quote
  3. 2nd December 2012, 11:43 AM #3
    robbotd5's Avatar
    robbotd5
    robbotd5 is offline Wizard
    Join Date
    Jul 2009
    Location
    Lake Macquarie NSW
    Posts
    1,353
    Total Downloaded
    0
    Just as easy to use a 12v test light. Won't take long to sort what's what.
    Regards
    Robbo
    Reply With Quote Reply With Quote
  4. 2nd December 2012, 09:11 PM #4
    Nova
    Nova is offline Master Subscriber
    Join Date
    Oct 2010
    Location
    Near Adelaide
    Posts
    102
    Total Downloaded
    0
    I have been searching for RAVE. If I can't find it soon I'll have to get another one, they are mighty useful.

    I was hoping that someone else had done the swap and could give me some pointers. I was really hoping that there was a plug behind the rear bumper where the wires branched off for the upper and lower lights, would make swapping them easy as pie.

    I have a multimeter so it is easy enough to identify which wire does which, I guess i will have to poke around in and under the rear to see what I can make of it.

    Cheers,
    Nova
    Reply With Quote Reply With Quote
« Quiet on Bitumen Tyres | 18" Tyres for D2 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!