Thread: rocker cover gasket

I use super glue to retain difficult rocker cover gaskets into the cover. A drop or thin line every inch or so, hold each section until set, then refit cover. Adds about 5 minutes to the job.

Yep got the correct gasket , thanks to the good people at roverlordoffroadspares. OVERNIGHT.
Could not get it in the little dimple at the back of the motor.
Took the gasket back off and placed in in the dimple on the block and then into the bolt locators. Starting at the rear I put all of the other steel locators in place with the rear bolts just started in their threads. Making sure to be careful near the cam chain I lowered it all into place and finished off tightening it all back down. Job finally done.
Thanks Guys for all your help. Regards Nick.