Printable View
Here is the link and quote:Quote:
Originally Posted by Slunnie
http://www.infrastructure.gov.au/roa..._2011%20v3.pdfQuote:
A motor vehicle under 4.5 tonnes GVM which is required to comply with ADR 24 may be equipped with tyres other than those listed on the tyre placard provided that... the speed rating of the tyres fitted to vehicles with special features for off-road use of at least 140 km/h N when the tyre placard requires a higher speed rating than N
Thanks for the link. I was on an iPad which isn't seemless like PC in doing links.
Just for information on hubcentric rings.Quote:
Originally Posted by twr7cx
If you go down the route I did, having rims machined more than likely the Centre Bore size will be to suit a LR Disco 3 at 72.6mm.
In addition, this opens up more options if you can look at wheels to suit the D3 as well to go on the D2.
To make sure they fit and you do not get any vibrations you need these to take the D2 hub centre from 70.1mm to 72.6mm, also it is a requirement to fit them as detailed in the NCOP.
Hub Centric Rings OD 72 6mm ID 70 1mm Aluminium Alloy | eBay
Have you guys fitted up these flash wheels...if so I would love to.see them added to this thread...
Cheers
Thanks mate.
Keep them coming people. I really like the Zu black and Zu anthracite jobbies...cant see any photos of D2's with them.
Cheers