-
6th June 2013, 03:14 PM
#1
Speedo and Engine cuts out
Was wondering if anyone has had a problem with the speedo briefly dropping to 0 and engine cut out at the same time. This happens for about 1 second and then all back to life again. Appears to happen at lowish speeds and load, never has happened at freeway speeds or with cruise on.
Thoughts ?
-
6th June 2013, 03:42 PM
#2
If you can add details of which engine D2 and year, you may get a little more help forthcoming.
And welcome to the forum.
-
6th June 2013, 04:03 PM
#3
Ah yep that usually helps
2001 V8 auto
-
6th June 2013, 07:24 PM
#4
Electrical? I had a car once that started bunny hopping every time I put the foot down. Turned out a dry joint in the power circuit of the ecu had enough resistance that the current load of the spark plugs caused enough of a voltage drop for the ecu to turn off. As soon as the sparks stopped, load went down, voltage went back up and ecu started again. Then the sparks kicked in etc etc etc.
Sounds like an intermittent electrical fault to me. Do the lights or stereo stop too?
-
6th June 2013, 08:18 PM
#5
Thanks Pinelli
All other electrics continue to work and tacho works fine whilst the engine and speedo do their hesitate thing. Will check earth points this weekend.
-
6th June 2013, 08:21 PM
#6
When the Nanocom powers up, the dash shuts down for a second or 2 and comes back. But doesn't effect the running. Sounds like a similar source of the power shutting off through a connection somewhere.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks