Results 1 to 4 of 4

Thread: td5 glow plug leads

  1. #1
    Join Date
    May 2013
    Location
    shellharbour
    Posts
    50
    Total Downloaded
    0

    td5 glow plug leads

    Hi,
    i was about to remove my glow plug leads and noticed that they were all cracked, maybe from previous owner? As i tried to remove them, every one has broken and left the end of the lead still on the glow plug and the inner electrical part hanging out of the broken lead.

    i have done a bit of searching and havent found much in regards to replacing these leads.

    any help or advise would be greatly appreciated.

    thanks
    Pepi

  2. #2
    Join Date
    Jan 1970
    Location
    Melrose SA
    Posts
    2,838
    Total Downloaded
    0
    Get some shrink wrap and put over the top of them this will hold them together.
    Its only the insulation that was broken on mine

  3. #3
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    Mine all broke when I was replacing the head. I used a high temp super glue to stick them back together.
    If you take care to align the two halves you should get a reasonable bond.
    As djam1 says it's just the insulating boot - the wire itself is still fine.

    cheers
    Paul

  4. #4
    Join Date
    May 2013
    Location
    shellharbour
    Posts
    50
    Total Downloaded
    0
    ok that's good to know thanks guys
    Pete

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!