-
6th August 2013, 11:46 PM
#1
td5 glow plug leads
Hi,
i was about to remove my glow plug leads and noticed that they were all cracked, maybe from previous owner? As i tried to remove them, every one has broken and left the end of the lead still on the glow plug and the inner electrical part hanging out of the broken lead.
i have done a bit of searching and havent found much in regards to replacing these leads.
any help or advise would be greatly appreciated.
thanks
Pepi
-
7th August 2013, 07:05 AM
#2
Get some shrink wrap and put over the top of them this will hold them together.
Its only the insulation that was broken on mine
-
7th August 2013, 03:12 PM
#3
Mine all broke when I was replacing the head. I used a high temp super glue to stick them back together.
If you take care to align the two halves you should get a reasonable bond.
As djam1 says it's just the insulating boot - the wire itself is still fine.
cheers
Paul
-
7th August 2013, 03:17 PM
#4
ok that's good to know thanks guys
Pete
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks