Quote:
Originally Posted by discowinter
I have a similar code that came with my non-genuine key. I'm using the 6 digits to program with a Nanocom but it won't program. Did you get this one to program?
Printable View
Quote:
Originally Posted by discowinter
I have a similar code that came with my non-genuine key. I'm using the 6 digits to program with a Nanocom but it won't program. Did you get this one to program?
I never could get it to work. Returned back to eBay seller. But, I recently bought two original keys from a guy who junked his truck, and the Nanocom worked like a charm using the code inside the key fob. Example of the code was “30D462”.Quote:
Originally Posted by awabbit6
Yes it’s the digits after the F’s there is another thread on this if it doesn’t have the yellow bit it won’t work https://uploads.tapatalk-cdn.com/202...3946706da4.jpg
Thanks to sierraferry for supplies pic.
Quote:
Originally Posted by discowinter
Thanks. I might have to do the same.
Normally the 6 characters from interior are like starting from second one in the top codeQuote:
Originally Posted by RobMichelle
https://i.postimg.cc/PrHw4RsV/D2-fob-codes.jpg
also the fob will work without the yellow bit just that the immobiliser kicks in after 15 seconds of the unlock command and another unlock commend is needed if it wasnt started within those 15 seconds
Well there ya go, I contacted seller of my 2 keys and they told me it was the numbers after all the F’s on bottom row.
The RF signal worked on both keys just wouldn’t program. I sent them back and they said they were going to check them. I tried different combinations of numbers before I gave up. I sent them to another great bloke on here as well and he tried programming to his vehicle with no luck, and we have both programmed key succesfully before.
Rob
My usual supplier had nil stock around a year ago so had to get keys from ebay supplier , internals didn't look even close , I hope you have success but if it's the same supplier I'd be surprised if you have any luck
It seems there are two types of transmitters used in D2s, apparently later models use a different system. I don't remember details exactly, but the key i got from ebay supplier could be recognised by nanocom, but not programmed. When returned, supplier said it was not compatible with my key. So there seems to be two different systems used. Good luck figuring out which you have.