Thread: Auxiliary Wiring Kit / Driving Lamp Kit circuits?

G'day Paul,

I have an auxiliary light switch which I believe would be the same as the switch pictured in your diagrams with the No.2 inside the headlight and beam icon. I am wanting to install this switch as an auxiliary driving light switch in my 2011 Defender 110 Double cab.

As it's a double cab, the rear window washer switch position is redundant although the current blank switch does have a loom connected to the blue switch connector that would usually run the rear window washer. I would like to position the auxiliary driving light switch in that position and (hopefully) utilise the existing wires and pins from the existing blue connector switch for the "panel illumination" function as well as run other wires to the driving light relay and main beam supply.

Would you have any diagrams that would help me identify the wires from the rear window washer switch connector (blue) for the panel illumination function and how they should be connected to the black auxiliary light (black) connector, as well as, how the relay wire and the main beam supply wire should also be connected to the (black) connector?

I hope that made sense.

Cheers,

Rohan.

Thank you so much Paul. You have saved me a heap of time and that means I will have the job done tomorrow.

Thanks a million,

Rohan.