Page 1 of 6 123 ... LastLast
Results 1 to 10 of 58

Thread: Mantec v safari snorkel

  1. #1
    mattg Guest

    Mantec v safari snorkel

    Hi all I have driven disco with tjm version and wind noise was higher then the safari/landrover one. Is the Mantec any noisier then the safari any other points that I should think about? I recon the Mantec on the G4 disco look better then the safari.

    Any experience out there with fitting a Mantec? Tips?

    Cheers Matt

  2. #2
    Join Date
    Apr 2012
    Location
    Orange, NSW
    Posts
    7,965
    Total Downloaded
    0
    Urban Panzer has a Mantec install on his site.
    Guess the main differences are that the Mantec is more internal than the Safari.
    Personally I prefer the Safari, but other than that I don't think there's much between them.
    The Phantom - Oslo Blue 2001 Td5 SE.
    Half dead but will live again!

    Nina - Chawton White 2003 Td5 S
    Slowly being improved

    Quote Originally Posted by Judo View Post
    You worry me sometimes Muppet!!


  3. #3
    Join Date
    Jan 2011
    Location
    Gippsland
    Posts
    1,508
    Total Downloaded
    0
    hi Matt

    I fitted a MANTEC Snorkel May 2012, and noisey it ain't (unless of course you dont like the turbo whistle) I chose the MANTEC because it was unobtrusive looking and designed for the D2 and other than that it does what all elevated air intakes do, it delivers dry, cooler, cleaner air to the engine. Apart from the imaginary RAM effect often attributed to a SAFARI Snorkel i reckon it functions no better or worse than any other. With the MANTEC there is a little vehicle disassembly and 'tin work' involved but take your time and the result is very satisfying.

    onebob

  4. #4
    mattg Guest
    Any Pics Onebob of the Mantec and where did you buy yours?

    I am thinking Paddock spares haven't worked out freight though.

    I am just trying to minimise the wind noise in the passenger seat.

    Quote Originally Posted by onebob View Post
    hi Matt

    I fitted a MANTEC Snorkel May 2012, and noisey it ain't (unless of course you dont like the turbo whistle) I chose the MANTEC because it was unobtrusive looking and designed for the D2 and other than that it does what all elevated air intakes do, it delivers dry, cooler, cleaner air to the engine. Apart from the imaginary RAM effect often attributed to a SAFARI Snorkel i reckon it functions no better or worse than any other. With the MANTEC there is a little vehicle disassembly and 'tin work' involved but take your time and the result is very satisfying.

    onebob

  5. #5
    Join Date
    Feb 2011
    Location
    Brunswick, Victoria
    Posts
    3,778
    Total Downloaded
    0
    Quote Originally Posted by mattg View Post
    I am thinking Paddock spares haven't worked out freight though.
    Nichola strikes again, no doubt. Don't know what happened to the customer service people they used to have? They were fast and no fuss when I ordered previously but the current "customer service" person is truly abysmal. Getting a shipping quote is like getting blood out of a stone. If you can find for a similar price anywhere else I'd buy from them. Otherwise all I can advise is to just keep hounding her, on a daily basis. If you don't get a response within 24hrs, email again until you do.

    cheers
    Paul

  6. #6
    Join Date
    Jan 2011
    Location
    Gippsland
    Posts
    1,508
    Total Downloaded
    0
    I purchased locally from ROVERCRAFT (they're in WA & VIC).
    I gotta say that there is no detectable wind noise because of the pipework being tucked away in the mudguard and what pipe is exposed is pulled in snug against the A pillar so it seemingly doesn't interfere significantly with the airflow over the body.
    Yes i got pics but PHOTOBUCKET is down at this moment .... will post later on.

    onebob

  7. #7
    mattg Guest
    Do you have the top facing forward or backwards?

  8. #8
    Join Date
    Jan 2011
    Location
    Gippsland
    Posts
    1,508
    Total Downloaded
    0
    Quote Originally Posted by mattg View Post
    Do you have the top facing forward or backwards?
    .......facing backwards it the only way the MANTEC is designed to work - if you want forward facing (and i've thought of it) look to buying a Southdown brand snorkle HEAD - they sell them as spare parts.

    onebob

  9. #9
    Join Date
    Jan 2011
    Location
    Gippsland
    Posts
    1,508
    Total Downloaded
    0
    Quote Originally Posted by onebob View Post
    .......facing backwards it the only way the MANTEC is designed to work - if you want forward facing (and i've thought of it) look to buying a Southdown brand snorkle HEAD - they sell them as spare parts.

    onebob
    Photobucket is still down so i have attached an image to this post - 'tis not the best but gives you an idea until i can link to photobucket.

    onebob
    Attached Images Attached Images

  10. #10
    Join Date
    Jan 2011
    Location
    Gippsland
    Posts
    1,508
    Total Downloaded
    0
    The Southdown snorkle tops were £27 last time i looked - went check it and find that the website has been hacked but they have an ebay web store where you can see the snorkle tops Southdown Snorkel TOP Wing Moulding Land Rover 90 110 | eBay

    onebob

Page 1 of 6 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!