Results 1 to 5 of 5

Thread: D2 TD5 Intercooler hose clamp set.

  1. 20th November 2013, 01:18 PM #1
    turbopsi's Avatar
    turbopsi
    turbopsi is offline Master
    Join Date
    Jan 2012
    Location
    Melbourne
    Posts
    189
    Total Downloaded
    0

    D2 TD5 Intercooler hose clamp set.

    Hi all,

    I'm planning to replace all the intercooler hose clamps on the old girl. Could anyone help out with a list of clamp sizes?

    Cheers
    Tony
    Reply With Quote Reply With Quote
  2. 29th March 2015, 03:30 PM #2
    DiscoKym
    DiscoKym is offline Master
    Join Date
    Mar 2012
    Location
    Adelaide SA
    Posts
    416
    Total Downloaded
    0
    No takers hu??

    Just checked while changing intercooler.

    Inlet manifold:
    EGR end - 60-80mm.
    Intercooler end - 50-70mm.

    Turbo side:
    All 4 are - 40-60mm.
    Reply With Quote Reply With Quote
  3. 29th March 2015, 04:34 PM #3
    sierrafery's Avatar
    sierrafery
    sierrafery is offline YarnMaster Silver Subscriber
    Join Date
    Jul 2014
    Location
    west of Transylvania
    Posts
    3,793
    Total Downloaded
    0
    you can buy them by part number too if you want Allbrit.de - Ersatzteile f?r LAND ROVER & MG ROVER
    Discovery Td5 (2000), manual, tuned
    Reply With Quote Reply With Quote
  4. 30th March 2015, 08:04 AM #4
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,162
    Total Downloaded
    0
    I have the wide clips with a bolt to tension them which are supposed to be for turbo pressure applications which I bought on ebay.

    They have to be done up really tight as I found going up Mcleods Shute one day when one blew off. This is not really a problem as all the pipes they clamp to are steel. It hasn't happened since in 30KK.

    Browsing through Masters hardware I found that they sell the bolt type (Tridon) for a reasonable price. I must say I was surprised.

    If fitting with a set of silicone pipes, IMHO you would need to roughen up the interior to prevent them slipping off.
    Regards Philip A
    Reply With Quote Reply With Quote
  5. 30th March 2015, 08:10 PM #5
    Jason789's Avatar
    Jason789
    Jason789 is offline Master
    Join Date
    Dec 2009
    Location
    Hampton Park
    Posts
    480
    Total Downloaded
    0
    I had trouble with turbo system hoses blowing off . I fixed it when fitting silicon hoses by putting a smear of silicon on the joining surfaces when assembling. A little bit of a hassle when any maintenance on the system(removing the hoses) is being done but, they haven't let go ever since.

    Sorry but I can't help with the hose clamp sizes

    Cheers,

    Jason
    Reply With Quote Reply With Quote
« Transfer case light comes on when braking. | d2 rock sliders »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!