Reply With QuoteI get the 2 clunks from the drivers door when opening and closing.
It maybe a broken weld on the check strap bracket to A pillar.
Still to fix mine...
http://www.aulro.com/afvb/discovery-...-detached.html
Master
SupporterAfter losing the roll pins from both front door check straps I replaced with bolts. Now I get two very loud clicks as the doors open to full extent. Any ideas why this happens and is there a fix?
2002 D2
_________________________
1996 D1 V8 - gone
2002 D2 Td5 ES- gone but still running elsewhere
2013 D4 SDV6 HSE - gone
2023 Defender 110SE D300
Master
I get the 2 clunks from the drivers door when opening and closing.
It maybe a broken weld on the check strap bracket to A pillar.
Still to fix mine...
http://www.aulro.com/afvb/discovery-...-detached.html
Swaggie
Years and years ago I think mine did that too - check strap in the A pillar. I'd forgotten all about that!
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
It's movement where the pin goes through.
Mine does it as well. CBF reaming it out and fitting a larger pin.
Master
SupporterThanks for the advice. I got new pins and fitted them and the noise has gone away. The welded attachments points look ok but I got a bit of extra tightening on the check strap nuts.
All good now and if you need the pins it is part number BDH100050L $1.80 from LRA.
_________________________
1996 D1 V8 - gone
2002 D2 Td5 ES- gone but still running elsewhere
2013 D4 SDV6 HSE - gone
2023 Defender 110SE D300
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks