Thread: Td5 Auto lock up and resetting adaptive values

Hi,

Is it still locking OK when cold, ie when you first go over 50 ?

If so then this would suggest the lockup clutch is OK,

Also when the lockup clutches burn up, you usually feel it try to lock at low throttle and then it slips as you gas it, if it locks fine first time then doesn't try at all it sounds like a control issue as opposed to converter clutch,

Dave

Originally Posted by Chucka13

Hi Caine,

What was the outcome with Ashcroft as im having similar issues and also have a HD TC installed and a stage 1 remap from TD5inside.

Thanks,
Chucka13 (Chris)

Same here. Ashcroft HD converter and an alive tune. It either locks up solid with no slip (as it should) or locks with slip when you feed the throttle during lockup. Had the loom to the auto checked and monitored the auto with the nanocom with no electronic faults. I also had the lockup solenoid replaced to be sure.

I might have to contact Ashcroft again. Hope its not a common theme with the Ashcroft HD converter. I paid the extra based on reputation on here and it was supposedly HD. Now I'm thinking I should have gone with a local company.