Results 1 to 3 of 3

Thread: Confirm that RAVE correct on alignment

  1. 14th January 2014, 01:18 PM #1
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0

    Confirm that RAVE correct on alignment

    I put my D2 in for alignment today as I measured that it had a little toe IN rather than the toe OUT detailed in RAVE.
    I specified 0.5-2.5 Minutes toe out as in my RAVE and the aligner set it to my specs.
    When I asked what their machine memory specified , they said a smidgeon toe IN.
    I would think RAVE to be correct, but has there been any revision?

    It feels fine and maybe a bit better but could be Halo effect
    Bit of a frustrating experience as I also wanted a rotate and balance , but they couldn't find the lock in the wheel brace bag! LOL.
    Regards Philip A
    Reply With Quote Reply With Quote
  2. 14th January 2014, 01:45 PM #2
    twr7cx
    twr7cx is offline YarnMaster Supporter
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    Pretty sure 0 - 2mm total toe out is the correct setting. The wheel alignment places always seem to scratch their heads at that one as their machines say different, but I get nasty vibrations if anything different < http://www.aulro.com/afvb/discovery-...when-cold.html >.
    Reply With Quote Reply With Quote
  3. 14th January 2014, 04:08 PM #3
    schuy1 Guest
    It most certainly should be toed OUT! How much seems to vary quite a bit between vehicles though. What makes mine run nice may not make yours so its a little trial and error thing.
    Cheers Scott
    Reply With Quote Reply With Quote
« D2 won't start | Discovery 2 codes »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!