Results 1 to 8 of 8

Thread: D2 TD5 key lost it's sync and won't resynched

  1. 22nd January 2014, 07:37 PM #1
    Rosscoe68's Avatar
    Rosscoe68
    Rosscoe68 is offline Wizard
    Join Date
    Nov 2007
    Location
    home at last - Port Macquarie NSW
    Posts
    1,271
    Total Downloaded
    0

    D2 TD5 key lost it's sync and won't resynched

    To start with my key has been working fine.
    I ended up with a spare key so used my old nanocom to program the second key. Synced key all good, and remote worked, but First key stopped working. So synced both keys and all good according to nanocom, but they don't remotely lock or unlock now.
    Tried re synching just the original fob but no go.
    Rf tests ok, but won't sync.
    As a side, Bought myself a new nanocom evo and just went through the detect key function on my other d2 and it worked and found the key straight away.
    Tried same on the problem car and it won't detect the key. Rf tests ok on evo as well though.
    Reply With Quote Reply With Quote
  2. 23rd January 2014, 01:03 PM #2
    Rosscoe68's Avatar
    Rosscoe68
    Rosscoe68 is offline Wizard
    Join Date
    Nov 2007
    Location
    home at last - Port Macquarie NSW
    Posts
    1,271
    Total Downloaded
    0
    Anyone ?
    Reply With Quote Reply With Quote
  3. 23rd January 2014, 04:20 PM #3
    rangeyrover
    rangeyrover is offline Master Supporter
    Join Date
    Dec 2013
    Location
    ̶W̶A̶ N̶S̶W̶ SA
    Posts
    102
    Total Downloaded
    0

    Keys

    Is the problem car an early d2?
    Mine is and it runs the 315 Mhz keys, rather than 433 Mhz on later cars.
    Once the RF test passes, perseverance will get the thing to sync.
    you do have to take care to sync it, then disconnect Nano com nicely and lock the car.
    I usually have to look up the procedure every time.
    Reply With Quote Reply With Quote
  4. 23rd January 2014, 07:02 PM #4
    Rosscoe68's Avatar
    Rosscoe68
    Rosscoe68 is offline Wizard
    Join Date
    Nov 2007
    Location
    home at last - Port Macquarie NSW
    Posts
    1,271
    Total Downloaded
    0
    How do you tell if it's 315mhz keys ?
    Reply With Quote Reply With Quote
  5. 25th January 2014, 06:59 AM #5
    mattg Guest
    I had a challenge once with Barry and it wouldn't unlock. I opened it with the key and could use the remote to turn the alarm off. And it worked fine after that. Not sure if this helps. Matt
    Reply With Quote Reply With Quote
  6. 25th January 2014, 02:04 PM #6
    mattg Guest
    Pm your vin number and I might be able to look it up on micro car.
    Matt
    Reply With Quote Reply With Quote
  7. 27th January 2014, 12:26 PM #7
    rangeyrover
    rangeyrover is offline Master Supporter
    Join Date
    Dec 2013
    Location
    ̶W̶A̶ N̶S̶W̶ SA
    Posts
    102
    Total Downloaded
    0
    The only sure way is to check the receiver in the roof lining or vin number. I had similar situations between cars where one key would work fine with the first car but not be detected by the second.
    Reply With Quote Reply With Quote
  8. 3rd February 2014, 07:53 AM #8
    Rosscoe68's Avatar
    Rosscoe68
    Rosscoe68 is offline Wizard
    Join Date
    Nov 2007
    Location
    home at last - Port Macquarie NSW
    Posts
    1,271
    Total Downloaded
    0
    finally seem to have gotten it sorted.
    ended up synchyng a spare key that has 1 micro switch missing, but it synched, then the original synched. not sure why, but its working now
    Reply With Quote Reply With Quote
« New Transmission cooler line options | WHEW! »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!