Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Turbo oil path?

  1. #1
    Join Date
    Dec 2011
    Location
    sydney - pining for the western desert
    Posts
    444
    Total Downloaded
    0

    Turbo oil path?

    Does the oil go in at the top & out at thr bottom or in at the bottom & out at the top?

    Both oil pipes can be blown through with minimal effort, so I'm a bit baffled as to where the oil flow blockage is that keeps destroying my turbos...
    TIA
    Alex

    Sent from my GT-I9505 using AULRO mobile app

  2. #2
    Join Date
    Nov 2013
    Location
    Sydney
    Posts
    24
    Total Downloaded
    0
    Goes in the top under pressure and drains out the bottom

  3. #3
    Join Date
    Dec 2011
    Location
    sydney - pining for the western desert
    Posts
    444
    Total Downloaded
    0
    Just a thought - if the bypass valve for the spin-on oil filter is sticking, could it cause these problems?

    Sent from my GT-I9505 using AULRO mobile app

  4. #4
    schuy1 Guest
    Yes it could cause problems. I think the best bet is disconnect the turbo feedline and connect a gauge into it , crank the engine and observe the results. No pressure/ low pressure could indicate a blockage in the filter housing. Or just remove the filter housing and check the ports and thermostat. it appears there is definitely some problem there
    Cheers Scott

  5. #5
    Join Date
    Dec 2011
    Location
    sydney - pining for the western desert
    Posts
    444
    Total Downloaded
    0
    Already got the filter housing off, but I'm not sure what to look for

    Sent from my GT-I9505 using AULRO mobile app

  6. #6
    schuy1 Guest
    You dont have a copy of RAVE? It gives you an idea of what ports and flow path

  7. #7
    Join Date
    Dec 2011
    Location
    sydney - pining for the western desert
    Posts
    444
    Total Downloaded
    0
    Yep I have RAVE, what I'm more after is troubleshooting advice

    Sent from my GT-I9505 using AULRO mobile app

  8. #8
    schuy1 Guest
    Ahh oki. Right, I have never had mine off yet so am just using generic fault finding ideas, but if you have it off remove the thermostat and check ports and galleries with air gun. That is really all I can say, sorry.
    Cheers Scott

  9. #9
    Join Date
    Dec 2011
    Location
    sydney - pining for the western desert
    Posts
    444
    Total Downloaded
    0
    Pulled off the circlip but there was no way I could get the plug behind it out. AFAIK by puffing, there was passage thru most of the ports but not necessarily from the main port to the one that feeds the turbo

    Sent from my GT-I9505 using AULRO mobile app

  10. #10
    Join Date
    Dec 2011
    Location
    sydney - pining for the western desert
    Posts
    444
    Total Downloaded
    0
    Additional - I can see the thermostat type thingy down the centre of the filter mount pipe, but I can't budge it with a screwdriver & I didn't want to get too rough for fear of doing further damage

    Sent from my GT-I9505 using AULRO mobile app

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!