You can easily hang the whole body weight on good sill mounted sliders....chassis mount has its problems
Ask Ben for a quote. Mine have bent ends on the tree protector too.
Cheers
Ps. Price per the web site less a tiny bit for lack of top treads
Printable View
You can easily hang the whole body weight on good sill mounted sliders....chassis mount has its problems
Ask Ben for a quote. Mine have bent ends on the tree protector too.
Cheers
Ps. Price per the web site less a tiny bit for lack of top treads
Chassis mounts hang too low, you can twist the sill, trust me. Just jamb a long bar between the tube and sill and pull back. But statically you can hi lift jack off mine. Which are full 150x50 rectangular section under the sill with the plate up the side using the original holes with nutserts and 4 bolts from underneath (SHCS) recessed into the underside so it's completely flat. Replace the hex heads with socket head button screws, they are lower profile than hex heads.
I like the look. The bolt heads do not catch anything...they are inboard of the rubbers etc.
Cheers