Results 1 to 5 of 5

Thread: Front dislocation cones?

  1. 22nd April 2014, 04:42 PM #1
    twr7cx
    twr7cx is offline YarnMaster Supporter
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0

    Question Front dislocation cones?

    Are there any dislocation cones available for the front of the Discovery 2?

    Terrafirma list TF533 < TF533 - Front dislocation cones > but they don't seem to be actually available anywhere.
    Reply With Quote Reply With Quote
  2. 22nd April 2014, 05:37 PM #2
    Slunnie's Avatar
    Slunnie
    Slunnie is offline Swaggie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,147
    Total Downloaded
    99.87 MB
    I would have thought that you'd be hard pressed to get a Disco2 to need them because of the bind in the radius arms. That said, I'd imagine theyre very similar to the D1 ones. If retained at the bottom, you may even find the rubber insulator does enough given the radius arm suspension.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
    Reply With Quote Reply With Quote
  3. 21st October 2015, 05:58 PM #3
    ozscott's Avatar
    ozscott
    ozscott is offline ForumSage Subscriber
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0

    Front dislocation cones?

    Mine are coming out. I have a 2 inch lift that came up higher. I have long travel Billies. I am getting loud banging at the front when the wheel drops away and then comes back (full travel with a wheel in the air) and nice blue score marks on the chassis rails that are an inch away from my blue Dobbo springs. Retaining is best?



    CheersImageUploadedByTapatalk1445415905.739148.jpgImageUploadedByTapatalk1445415929.419097.jpg
    Reply With Quote Reply With Quote
  4. 22nd October 2015, 09:39 AM #4
    ozscott's Avatar
    ozscott
    ozscott is offline ForumSage Subscriber
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0
    Has anyone used the Terrafirma spring retainers on the front bottoms?
    http://4wdindustries.com.au/land-rov...rma-tf524.html
    Reply With Quote Reply With Quote
  5. 22nd October 2015, 03:27 PM #5
    ozscott's Avatar
    ozscott
    ozscott is offline ForumSage Subscriber
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0
    Ok I know what the problem is. The springs have heaps of travel. Its the fact that the lift caused the front end to move to one side... causing the compressed spring on one side to bang against the chassis rail...so adjustable panhard rod from Ben at APT (helpful as always) is going in.

    I might need to re-route the ABS lines/wiring loom. Has anyone got any pics of doing this to get more out of them on the flex?

    Cheers
    Reply With Quote Reply With Quote
« ABS sensor connection points | TD5 EGT »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!