Thread: discovery radio code

Disco 1 or 2?
I just found this on the 'net, it may not apply to yours:

you select the character position with the channel numbers and scroll up and down with the normal scan buttons.

Is this radio he has?

[ame]http://macassemble.com/lrm/discovery_ii/Discovery%20II%20Audio%20System%20(2003).pdf[/ame]

thanks for the info it is a d2 cd deck with buttons 1 to 6 on face

Try this ImageUploadedByTapatalk1403998192.101856.jpg

It's for an alpine head unit but should be the same idea.

Originally Posted by chrisandebreg

thanks for the info it is a d2 cd deck with buttons 1 to 6 on face

So if I'm correct, that's the unit in the newer facelift D2 models (2003/2004) - It's a Visteon single slot load CD/AM/FM unit

If, for example, your code is 4500 ....

Push button 1 FOUR times
Push button 2 FIVE times
Push button 3 TEN times
Push button 4 TEN times

THEN push the RIGHT arrow button ONCE (this is on the far right hand side )

Done ! Hope that gets you where you need to be.

Sent from my iPad using Braille

thanks guys will try these out when i catch up with the car

Hi
if your code is say 7140
you push button 1, 7 times
button 2, 1 time
button 3, 4 times
button 4, 10 times to get you the Zero your after ( or the appropriate button) requiring the zero
in any sequence
Cheers
Paul