Thread: D2 Front Brake caliper getting warmish

My right front caliper is getting much warmer than the others. There is far more brake dust on that wheel too.

I replaced the pads as they were worn and it seemed to solve the problem. But now it is starting again.

I read somewhere that the pipes delaminate and do not release the pressure thus causing the brakes to bind. Is this a common failure?

Otherwise is it just a piston binding - disassemble, clean and reassemble with new seals?

Thanks
Paul

The pins on my rear calipers were all rusted and seized. The whole rear wheel rim became hot to touch. I bought some new guide pins, boots and lube from rimmerbros, cleaned the calipers with brake cleaner, lubed them up and refitted.