Thread: Transfer case

Originally Posted by laney

Can anyone tell if a d1 transfer case will fit a td5 d2 and can I use the d1 shift lever thanks.

Yes it will but....
1/ You need to change the front output flange from the D2 box to fit the front shaft.
2/ You will not have a position to fit the high/low switch from the D2 box.
You could have an in dash switch to do this if you felt so inclined.
This switch enables different/revised mapping for low range and alters shift characteristics of the auto.
3/ The D2 box is quieter than a D1 box.
4/ Shift lever can be used but will require some mods.