Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: Where can i get a front bar like this.

  1. #21
    mattg Guest
    So how are winch bars airbag compliant? I can't see how the crush cans can handle being winched off.

  2. #22
    Join Date
    Mar 2010
    Location
    Perth
    Posts
    506
    Total Downloaded
    0
    The crush cans are very strong and can handle those sort of stresses, it's all in the engineering....

    But there is considerable discussion on recovery points and where they should be, if they are safe to winch, snatch etc....can of worms.

    I personally don't use my bar to snatch, only winch......

    Cheers
    Kev
    Kev
    2005 TDV6HSE D3
    2006 V8HSE D3
    99 TD5 D2 (Gone)
    97 RR Autobiography original (Gone)

  3. #23
    Join Date
    Jun 2009
    Location
    North Central Victoria
    Posts
    2,356
    Total Downloaded
    0
    I believe Slunny said ARB crush cans are rated to 15 tonne. That would be a big snatch

  4. #24
    Join Date
    Mar 2010
    Location
    Perth
    Posts
    506
    Total Downloaded
    0
    This has all been discussed many times in other threads, but, although that rating sounds like a lot, you have to consider shock loading.
    One car accelerates, the other car is stationary and stuck in possibly that black goop loosely called mud, that stuff that just doesn't want to let go.
    So then your 2 tonne d2 loaded up with gear probably closer to 3 tonne, suddenly gets a large ripping pull on those crush cans, how much weight, or pulling pressure is on those cans before the car actually moves? Remember the cans are designed to crush, is that rating for extension as well?
    Look, it's probably ok, but I choose to not risk it. I'm going to get some of those recovery points that bolt to the chassis so I can snatch if needed.
    If I remember correctly, I think even ARB calls the eyelets on their bars "tow points" and I think someone even was advised not to snatch from them.....
    This discussion has been held on many forums from various brands of vehicles and the general consensus is not to snatch an airbag bar, get proper recovery points fitted to do that......a lot of people do though, and have had no problems.....yet.....but for the cost of a couple of steel brackets (recovery points) why risk it?

    Cheers
    Kev
    Kev
    2005 TDV6HSE D3
    2006 V8HSE D3
    99 TD5 D2 (Gone)
    97 RR Autobiography original (Gone)

  5. #25
    Join Date
    Sep 2010
    Location
    Branxton NSW
    Posts
    581
    Total Downloaded
    0
    I was always under the impression that the "winch cradle" was bolted direct to the chassis rails BEHIND the crush cans, so that the stress and strain was placed directly on the chassis rails. This is not the case???

    all joking asside, Ive run a NON-SRS bag on my SRS Equipped D1 for the last 3 years, hasnt caused any problems, but I havnt hit anything either.

    look at it like insurance, really, how often do U make a claim on ur insurance? Ive never made one, touch wood, but when I do need to make one, ill be happy that its there! Its a gamble...

  6. #26
    Join Date
    Mar 2010
    Location
    Perth
    Posts
    506
    Total Downloaded
    0
    The TJM bar has the cradle behind as you say, but the ARB and others have the winch cradle as part of the bar.

    As far as insurance goes, if you have a head on crash and you have a bar on that is not compliant and does cause an issue with the airbags going off, well if you are still around to make a claim, ...............yep, that's a gamble.....
    Kev
    2005 TDV6HSE D3
    2006 V8HSE D3
    99 TD5 D2 (Gone)
    97 RR Autobiography original (Gone)

Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!