Originally Posted by
Disco_Fever
I don't think I understand what you mean - the brackets to relocate the sensors were fitted as well. Everything needed to space the rear suspension has been fitted, and bolted in AOK.
But now the suspension won't reinflate.
The battery was disconnected the whole time we were changing over the parts. What would cause this? Are you saying that we will need a Nanocom or similar to clear any possible error codes that have been recorded? Or is there something else that could cause the suspension to no inflate? If I push the off road height button, it gives the warning chime 3 times and nothing happens.
as long as you didnt disconnect the sensors and the battery was disconnected there is no reason for fault codes... i said about that in my first post when i didnt know what you did to cover all the options
even with brackets fitted there is a chance that the position of the sensors to be different, i mean the sensor to be more extended than it was before...in this case the sensor's output is similar with the output from inflated bags ORM position from before the mod and in this case the ECU has no reason to give inflation command "considering" that the bags are inflated
IMO you need to plug in a tester and recalibrate the heights as long as you didnt touch anything to affect the SLS's "hardware"...and as said before ' all doors must be closed
Discovery Td5 (2000), manual, tuned
Reply With Quote
Bookmarks