Reply With QuoteYes I think you will have to remove it as the condenser comes out from the engine bay
Sent from my GT-S7275Y using AULRO mobile app
Wizard
Supporter
removing air con condensor
can this be done without removing the radiator or do I have to bite the bullet and remove it and intercooler
disco seriesII mods so far:-bullbar,hyd winch,
detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.
In the event of nuclear war,Disregard this message
ChatterBox
SupporterYes I think you will have to remove it as the condenser comes out from the engine bay
Sent from my GT-S7275Y using AULRO mobile app
have a good one :D ken :wasntme:
MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
1996 D1 300TDI GONE
08 ford ranger c/c
WRECKING DISCOVERY 2
PM ME FOR WHAT YOU ARE LOOKING FOR
OMG, you are correct. I all has to come out!
I have this job to do too as nobody here can do it!
Just looked at RAVE and indeed the rad has to be removed.
Had not reolised!
Wizard
SupporterI was afraid that might have been the case might as well clean out the intercooler while it is out.
disco seriesII mods so far:-bullbar,hyd winch,
detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.
In the event of nuclear war,Disregard this message
I have now had a look at this, I'm talking about a V8.
Indeed it all has to come out.
Anybody given it a go?
Cheers, Jerry
AT REST
On the V8 I just finished wrecking the condenser definitely couldn't come out any way other than with the radiator out first.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks