Results 1 to 3 of 3

Thread: hard starting issue

  1. 23rd September 2014, 04:50 PM #1
    lyonsy
    lyonsy is offline Master
    Join Date
    May 2009
    Location
    wimmera
    Posts
    503
    Total Downloaded
    0

    hard starting issue

    having starting issues with my d2a where i am having to prime the fuel system to get it started.
    nanocom is showing no codes and reads rpm when cranking
    there is very little cat noise when priming
    but willcrank and crank with no life like it has no fuel, prime the system and it normaly starts first kick.
    its only done 2000km since the filter was changed
    it has also been running rough at high load at low rpm and lacking power.
    iam thinking its the fuel pump any other possibility's
    does the the td5 have an inline fuel pressure regulator to hold rail pressure and do they fail?
    thanks
    mark
    Reply With Quote Reply With Quote
  2. 24th September 2014, 08:50 AM #2
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,162
    Total Downloaded
    0
    There is a non return valve on the filter which can cause this problem.
    Do a google search.
    However you have said that the engine runs roughly, so IMHO first look at the "Red Plug" and clean it first.
    Regards Philip A
    Reply With Quote Reply With Quote
  3. 24th September 2014, 08:55 PM #3
    PommD2
    PommD2 is offline Member
    Join Date
    Mar 2014
    Location
    Sydney
    Posts
    3
    Total Downloaded
    0
    I would say poss injector seals. Sounds very familiar if you have to prime the fuel every time. Combustion gases getting in the fuel.
    Reply With Quote Reply With Quote
« TD5 Auto doing strange things... | Coolant Leak! »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!