Have you adjusted the XYZ switch back to where it needs to be? The fault should clear itself then - check in all gears.
refitted transmission - now in limp mode? i have drive but only 3rd +lock up -
4th +lock up & rev . stall test 2800rpm press.@ idle 85psi. the xy s/w was out of adjustment when ign was turned on. if this is limp mode is there anyone near kurri kurri with a nanocom or similar unit to do a fault code read & clear. mobile 0421529933.![]()
Have you adjusted the XYZ switch back to where it needs to be? The fault should clear itself then - check in all gears.
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
yes have adjusted the s/w but from the info i have the fault code can only removed with a scan tool.
Disconnect and fully charge the battery, then try it again.
Jc
The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks