Brake Fade issue

Quote:

---

Originally Posted by ScotsD2

You may have air in ABS modulator

Always bleed with ignition off

Try this If you want to make sure the modulator is bled,
Put the transfer box into low and select HDC,
(A couple of notes HDC will not function above 31mph or if brake or clutch pedals are pressed.)
Accelerate up to 25mph then take your foot fully off the throttle HDC will slow you down to 5mph.

Run through this a few times then rebleed.

---

thanks for your reply,
I have done the abs modulator procedure and re-bleed several times now but still the same result. 😨