Thread: Build Plate?

Vic roads had trouble finding mine, I had to find it for them, I had a plate under the Brake master cylinder area.

Originally Posted by Roverlord off road spares

Vic roads had trouble finding mine, I had to find it for them, I had a plate under the Brake master cylinder area.

as marioo says the compliance plate is located on the inner wheel arch just below the booster

Found that one. I need to know the month it was built.
Any pointers?

Will

Follow the Sapper.

There should be another plate at the front panel of radiator support
http://smg.photobucket.com/user/paul...ion-1.jpg.html

Must be my week. That one only tells me the paint and trim colours.
Keep going brains trust. Haha
I need this for a new bull bar as I had my first prang the other week.

Will

Follow the Sapper.

Hi Will go back to the one near the brake booster, I just checked mine and found it there, it's on the very left edge of the alloy plate hard to see. Where the GVM stamp is , just under there is XX/XX which is your date it doesn't actually say build date, it just has the 4 numbers. to the right side of it is the stamped vin number

it is very small and as I said right on the left edge
regards, Mario

Look in front of the air box lid on the vertical panel. You won't see it if your standing in front of the disco (but you'll see the two rivets that hold the tag in place). Stand on the left hand side and look forward over the top of the air box lid.

Build date year and month.


Sent from my iPad using Braille

Or just go to your PC and enter your VIN into Microcat :-)