BS330 Viton...Quote:
Originally Posted by PhilipA
Locally would have cost about $6.00 for 5 :cool:
I keep a bag of them in my workshop along side the ones for the fuel Cooler :cool:
Mine are also the American moulded ones, not the Taiwanese version
Printable View
BS330 Viton...Quote:
Originally Posted by PhilipA
Locally would have cost about $6.00 for 5 :cool:
I keep a bag of them in my workshop along side the ones for the fuel Cooler :cool:
Mine are also the American moulded ones, not the Taiwanese version
Well it's a pity you didn't post earlier as I googled and ebayed and the uk supplier was cheapest. The last thread on the subject gave a per o ring cost of $7. Maybe you can tell others who may be interested the suppliers name.
Regards Philip A
Quote:
Originally Posted by ramblingboy42
The TD5's camshaft front oil seal, consisting of a large plastic plug with an O-ring , a simple push fit. The O-ring gradually becomes squashed & hardens, making it a loose fit. You'll know when it needs replacing, oil will cover the front of the engine. On some occasions, a cable held by 2 clips in front of it is the only thing stopping it falling out completely . Should be no need to bodge it up with all sorts of muck, worst case buy a new plastic plug & genuine O-ring. Bob
That is what I did and it lasted only 35KK. So now I will try a new oring.Quote:
Should be no need to bodge it up with all sorts of muck, worst case buy a new plastic plug & genuine O-ring. Bob
Regards Philip A
C'mon Tombie, where did you buy them for that cheap? Cheapest I could find on the net was $20 for two from England.Quote:
Originally Posted by Tombie
Wait a tick! Foundfive delivered to my door for 12 quid. Not as cheap as tombie's source but cheap enough for me.
http://www.ebay.co.uk/itm/IMPERIAL-S...item565de12684