Just fit the new seats, plug them in, flash the Nanocom up and Bobs yer Uncle ... Well not quite ... You'll have to fit the seat controls by either swapping out the console or carefully cutting out the openings (I did this, made a template - Take your time).
If the seats are heated, you'll also need the requisite window switch panel with the heater controls fitted.
I scored a full set of heated grey leather seats for $500, a wee bit grubby and the drivers seat edge was worn - but they came up good with a bit of TLC, they are miles ahead of the cloth seats in comfort and adjustment.
IMHO I wouldn't bother trying to change them to manual adjustment, I'm not even sure you can do it to be honest. I'm pretty sure though that some Discos were spec'd with manual adjustment leather seats.
Dave
TRS Chip ,D2a I/c, Silcone Hoses, EMS2, 2" Lift, BFG KM2s, QT Diff Guards, 4X4 DE Guard, Shadow Bar. VRS Winch, LR Light Guards, .50 CDL, Provent 200, Slickrock Disconnects, Rovadrive Sump, G4 Roof Rails, D2a SLABS ECU, APT Sliders.DBA Rotors. ABS Ext.
Bookmarks