Thread: Springs for 2 inch lift with bullbar and winch

Tough Dog sell springs for your exact purpose. I ran tough dog 35mm lift spring and shocks on my RRC. It was a great combo. Pedders also the same lift. You need to know the min and max install of your shocks before buying lift springs.

I had dobinsons but I felt they were a bit stiff with only an xrox bar and dual battery under bonnet. They definitely gave a 2 inch lift though. I think from original spring height the difference was 75mm.

I'm running Dobinson springs on my D2a now also. I've got the plus 40-100kg springs on the front. TD5, with alloy bar with winch. I think I probably would have been better off with the plus 40kg front spring. The car would sit better, but the 2 springs are the same rate just the plus 40-100kg are longer. But before you fit them find out the install of your shocks and call Dobinson to ask if they will match first.

Dobos. Great springs. I put in stock + 20 and with TJM bullbar, lpg system, v8, heavy duty tow point etc it still came up more than the top of the stock band plus 20.

Cheers

220lb front springs, dobinson/arb/tjm all have them listed as HD raised.

I have + 2"dobinsons, & RAW NITRO shocks.The rear shocks are progressive. much better ride, & handling, very happy. Check out this site, in the D2 section. Will give you an idea on price, at least, Bob




APT Fabrication Custom Land Rover Parts & Accessories - Discovery 2

I had Dobo progressive in the rear but way to much sag with 60l of LPG plus tanks weight so swapped for dobo linear...much better.

Cheers

My fronts are Dobo progressive