On the left you can also have front spots, plus front fogs. On the right the D2a also had fuel flap release (relocated).
I have a 2002 TD5 an i'm trying to work out what the extra connectors into blank facia switch in the binacle are?
Currently I have rear fogs on the left and rear washer, rear wiper, cruise control on the right.
Any Ideas?
On the left you can also have front spots, plus front fogs. On the right the D2a also had fuel flap release (relocated).
So the wires which are there currently would be for front fog (which I expected) and front spots?
Next question, any ideas where the connection are in the bonnet for the spots? I have found the fogs but not the spots?
For referance my fuel release is to the right of the climate control unit
Last edited by coolkris95; 22nd April 2015 at 10:50 PM. Reason: More info
It's normal for 2002 modell to have the fuel flap button where you have it, only facelifts have it on the binnacle(or maybe some very late 2002 - early 2003 tranzition prefacelift modells)
There are only two modells of binnacle switch factory setups, for prefacelift and facelift modells, if you find plugs under the blank switches those are for the systems which are fitted on the facelift modells but in most cases it's only the wiring, the relays(if needed) are usually missing, the only thing which should be there under a blank plug is the cruise control circuit where it wasnt fitted
No factory setup for spot lights so dont search in vain, see attachments
Discovery Td5 (2000), manual, tuned
Actually there is, but there is no factory fitted wiring it comes in a kit, switch and wiring.
See, RAVE doesn't have all the answers. Parts book and exploded diagram are just as good re service as they have part numbers and exploded diagrams.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks