Looking at RAVE page 758 there are two of those hooked things routed up into the engine compartment, onto a clip on the bulkhead, between the heater hoses.
Bo
When installing rear coils today I found this dangling from my vehicle. My educated guess is its the transfer care breather.
Am I correct?
Where should it be routed?
I have temporarily cable tied it up out of the way.
Cheers
Glen
![]()
Looking at RAVE page 758 there are two of those hooked things routed up into the engine compartment, onto a clip on the bulkhead, between the heater hoses.
Bo
Runs up to the top of the firewall and hook over the coolant hoses on the left side (as you stand infront of the vehicle staring into the engine bay). You should see others there already.
Check the hose for damage - may have rubber through on the propellor shaft.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks