Results 1 to 4 of 4

Thread: Transfer case breather?

  1. #1
    Join Date
    Feb 2015
    Location
    Vic
    Posts
    107
    Total Downloaded
    0

    Question Transfer case breather?

    When installing rear coils today I found this dangling from my vehicle. My educated guess is its the transfer care breather.

    Am I correct?
    Where should it be routed?





    I have temporarily cable tied it up out of the way.

    Cheers
    Glen

  2. #2
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,254
    Total Downloaded
    0
    Looking at RAVE page 758 there are two of those hooked things routed up into the engine compartment, onto a clip on the bulkhead, between the heater hoses.

    Bo

  3. #3
    Join Date
    Feb 2011
    Location
    Hobart, Tasmania, Australia
    Posts
    3,828
    Total Downloaded
    0
    Runs up to the top of the firewall and hook over the coolant hoses on the left side (as you stand infront of the vehicle staring into the engine bay). You should see others there already.

    Check the hose for damage - may have rubber through on the propellor shaft.

  4. #4
    Join Date
    Feb 2015
    Location
    Vic
    Posts
    107
    Total Downloaded
    0
    Quote Originally Posted by twr7cx View Post
    Runs up to the top of the firewall and hook over the coolant hoses on the left side (as you stand infront of the vehicle staring into the engine bay). You should see others there already. Check the hose for damage - may have rubber through on the propellor shaft.
    Thanks. I'll check that tomorrow.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!