SLS Wabco solenoid thing has threaded

mattg · 22nd June 2015, 06:39 AM

Just about to leave for the cape after a multitude of holdups and thee disco wants to keep resting it's ass on the ground. Not the best timing.

Not sure if there is another way to air down the bags I can't find it in the Nanocom. But I had to undo the supply lines to the rear bags to fit the lift blocks. Works well on the blocks but I have quite a leak on the passenger side. I made some tyre valve jiggers and turned off the SLS with the Nanocom.

Can those things be recoiled to fix the tread air tight?

Anyone bought one of them separate to the compressor?

Cheers Matt

**lewy** · 22nd June 2015, 06:52 AM

pretty sure they can be bought seperatly however check to see if the "o" ring is still on the fitting.the landy wreckers in sydney will have a bin full of stuffed compressors with valves just grap valves off them the valves themselves are pretty reliable.

**Pedro_The_Swift** · 22nd June 2015, 06:56 AM

are you carrying schrader valves and spare air line?
very cheap insurance

mattg · 22nd June 2015, 07:16 AM

Originally Posted by Pedro_The_Swift

are you carrying schrader valves and spare air line?
very cheap insurance

Yep and they work a treat. The one I had in the glovebox didn't work but i found 2 big truck tubes in the hopper at tyrepower dril it out with 7mm drill and then tap it m8 1 thread I think it is.

O ring is a little dicky but it is definatly threaded. Is there a way to air down without undoing the airline?

**Pedro_The_Swift** · 22nd June 2015, 07:26 AM

Probably with a nanocom,,

must be wary of arms and things when disconnecting airlines

Thread: SLS Wabco solenoid thing has threaded

Thread Tools

SLS Wabco solenoid thing has threaded

Bookmarks

Bookmarks

Posting Permissions