Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Disco II headlight globe replacement?

  1. #11
    Tombie Guest
    How we as a society every arrived at some units of measurement is beyond me...

    Wattage is not an indicator of light.. Lumens/Watt in this case is demonstrated.

    +50 etc are all higher efficiency elements, producing higher lumen/watt output.

  2. #12
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    Tombie to separate fact from fiction do what I did, go to the Osram Germany site and look at the technical specification of the Osram H4 "Nightbreaker" and the Osram "Original Line"
    The Nightbreaker 64193NBU has a stated luminous flux of 1650/1000 lumens
    and the Osram "Original Line" 64193 has a luminous flux of 1650/1000 lumens.
    Interestingly both are listed at an input wattage of 75/68, I assume because that is at 12V while the tested voltage is 13.2.
    It has full specs on their site including standard hours life and everything else you would want to know.
    I have done this exercise before and it confirms my view that only the colour is different, caused by the blue band on the bulbs.
    Regards Philip A

  3. #13
    Tombie Guest
    Thanks. Hadn't looked at Osram.
    Made a call and asked a question or 3.

    So... Here goes the apples and oranges!

    You are correct that banding the lights changes colour temperature.

    It seems to "put the light" where it's wanted they use a tighter winding, and more precision located filament.

    They then up the gas pressure to assist the bulb life.

    By doing so the light becomes closer to a "singularity" (optimum for light generation) and then when combined with reflector and optics gives a more useable light output.

    So taking the light, optimising the focal point and cutting outlying blue spectrum light (only banded each end) is how the improvement is gained.


    I still stand by the correct measure of lighting - lumens, candela etc... Watts is a measure of power.

  4. #14
    Join Date
    Aug 2015
    Location
    melbourne
    Posts
    69
    Total Downloaded
    0
    Thank you all for your thoughts and opinions. I will give these OSRAM Nightbreakers a crack and see how I go. They have got to be better than what's currently in there in any case.

    Cheers!

    (Tombie - would you mind replying to my private message please - Thanks!)

  5. #15
    Join Date
    Dec 2012
    Location
    Perth, WA
    Posts
    2,043
    Total Downloaded
    0
    Well I can't tell you if upgrading the wiring helps the standard lights much.
    I've added about 3 inches 4awg wire to a distribution block then 4 x 25amp (Jaycar measurement, no idea of exact mm2) to 8 relays (one each for high, low, 60w LED bar, driving light both left and right).

    The light is pretty good but I'll be upgrading the IPF 900 lights to 100w HID. They are reasonable as they are but look very orange with the LEDs on the sides and +50% bulbs in the head lights.

    The IPF aren't a scratch on Hella reflectors that I'm used to but I picked them up second hand $200, in very near new condition.



    Happy Days.

  6. #16
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,372
    Total Downloaded
    0
    I like the plate!

  7. #17
    Join Date
    Dec 2012
    Location
    Perth, WA
    Posts
    2,043
    Total Downloaded
    0
    Yeh, we couldn't get "We're" so we bogan with "We lost. ay bro". I had to put Don't Follow us on the back window because people thought we meant that we lost as in we lost a bet and got a Land Rover. LOL.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!