Results 1 to 7 of 7

Thread: Dashboard lights failure

  1. #1
    Join Date
    Oct 2012
    Location
    lethbridge
    Posts
    785
    Total Downloaded
    0

    Dashboard lights failure

    Hi every one.
    I have been trying to replace the back lights in the ATC or air conditioning module on my 99 TD5.
    I find a faint glow on the left hand temp control up/down buttons
    and the A/c main panel lights up but the right side does not.
    The local Land Rover repair shop I use has none left and no knowledge of where to get any more.
    The smaller lamps have long wire tails, that have to be wound around the sides of the plastic plug/base bit. and then cut to length.
    None of the bottom buttons are lit at night.
    I also find that the odometer lamp is not working.
    I was wondering if I had a fuse problem and if so where or which fuse it would be?
    Any one know where to get the lamp globes with the tails?
    Regards,Nick.

  2. #2
    Join Date
    Sep 2007
    Location
    Bairnsdale enjoying the rural view no rooftops to see here
    Posts
    2,450
    Total Downloaded
    0
    odo lamp is just a globe iirc there are 5 globes in the climate control unit
    have a good one :D ken :wasntme:
    MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
    MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
    1996 D1 300TDI GONE
    08 ford ranger c/c
    WRECKING DISCOVERY 2
    PM ME FOR WHAT YOU ARE LOOKING FOR

  3. #3
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,374
    Total Downloaded
    0
    I used blue led's for buttons. Nice look and lasts. Cheers

  4. #4
    Join Date
    Aug 2015
    Location
    Charlton Victoria
    Posts
    56
    Total Downloaded
    0
    JAYCAR or a similar shop - our local one changed the new bulbs onto the bases! I handed over dead bulbs and was out of the store in less than 5 minutes, all new and good to re-assemble!
    Matt

  5. #5
    Join Date
    Oct 2012
    Location
    lethbridge
    Posts
    785
    Total Downloaded
    0
    Bloke in my local Jay car did not show any interest. He just said ,No we don't do dash lights . See ya.

  6. #6
    Join Date
    Jul 2014
    Location
    PERTH, WA
    Posts
    354
    Total Downloaded
    0
    Hi Worane,
    Have a look at the thread about 8 below yours under "Discovery 2" : it is entitled Disco 2: Replacing dashboard, ATC and digital clock bulbs.
    In it, Matt shows exactly how ro go about this task for the Clock, the ATC module, and the main instrument panel (Tacho & Speedo, etc).
    He includes useful photos and the part numbers for some of the lights required. From what you say, it seems that some globes are different in your car (but it might just be that the ones Matt shows will fit).
    Following his info, I have just completed this job for my clock and ATC module. I had already replaced the illumination globe for my odometer - it was a simple task, and a local auto-electrician had the right bulb. I just transferred the green sleeve from the old globe to the new one as it was just a clear bulb).
    Just be gentle with everything, because plastic that is 16 years old can be very easily broken.
    Cheers,
    AndrewMilne

  7. #7
    Join Date
    Jul 2014
    Location
    PERTH, WA
    Posts
    354
    Total Downloaded
    0

    Additional comment!

    Quote Originally Posted by worane View Post
    Hi every one.
    I have been trying to replace the back lights in the ATC or air conditioning module on my 99 TD5.
    I find a faint glow on the left hand temp control up/down buttons
    and the A/c main panel lights up but the right side does not.
    The local Land Rover repair shop I use has none left and no knowledge of where to get any more.
    The smaller lamps have long wire tails, that have to be wound around the sides of the plastic plug/base bit. and then cut to length.
    None of the bottom buttons are lit at night.
    All 8 of these are illuminated by one ( a single globe - Matt's post shows the Part Number)
    I also find that the odometer lamp is not working.
    I was wondering if I had a fuse problem and if so where or which fuse it would be?
    Any one know where to get the lamp globes with the tails?
    Regards,Nick.
    See extra point above

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!