Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Tail Door Will not open - D2

  1. #11
    Join Date
    Jul 2014
    Location
    PERTH, WA
    Posts
    354
    Total Downloaded
    0

    Any progress, Juan?

    Quote Originally Posted by Juan View Post
    Gents,
    This fault just popped up today, I can lock the tail door using the fob on the key but it will not unlock. The only way to get the tail door open is to climb in and open it manually from the inside. I have done a search of posts and threads and do not see anything there with a similar problem.
    Any ideas? all the other 4 door locks are working fine
    J
    Hi Juan,
    In the 5 days since you asked for ideas on your problem with the rear door not opening, has the issue been fixed?
    We all learn and gain when a Member reports a successful outcome and says what the problem was caused by, and what the remedy was.
    Any such news?
    Andrew Milne

  2. #12
    Matty_G Guest

    Tail Door Will not open - D2

    I'm having a similar issue but it is the front 2 doors that lock but will not unlock.... Can unlock the drivers door with the key but the passenger door will only unlock if I pull the handle on the inside of the door.... If I try to pull up the lock tab near the window it just springs back down...

  3. #13
    Join Date
    Sep 2007
    Location
    Bairnsdale enjoying the rural view no rooftops to see here
    Posts
    2,450
    Total Downloaded
    0
    Quote Originally Posted by Matty_G View Post
    I'm having a similar issue but it is the front 2 doors that lock but will not unlock.... Can unlock the drivers door with the key but the passenger door will only unlock if I pull the handle on the inside of the door.... If I try to pull up the lock tab near the window it just springs back down...
    you need to replace your actuators
    have a good one :D ken :wasntme:
    MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
    MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
    1996 D1 300TDI GONE
    08 ford ranger c/c
    WRECKING DISCOVERY 2
    PM ME FOR WHAT YOU ARE LOOKING FOR

  4. #14
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    that will be the mechanism or the actuator.

    open up the door, disconnect the acutator.

    it could be as simple as a spring in the mechanism failed which costs about $2 and a couple of hours work.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  5. #15
    Join Date
    Sep 2007
    Location
    Bairnsdale enjoying the rural view no rooftops to see here
    Posts
    2,450
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    that will be the mechanism or the actuator.

    open up the door, disconnect the acutator.

    it could be as simple as a spring in the mechanism failed which costs about $2 and a couple of hours work.
    d2s are a sealed unit not like the d1 setup the actuator is incorporated in the lock assembly
    have a good one :D ken :wasntme:
    MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
    MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
    1996 D1 300TDI GONE
    08 ford ranger c/c
    WRECKING DISCOVERY 2
    PM ME FOR WHAT YOU ARE LOOKING FOR

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!