What happened to your Discovery 2 today?

Quote:

---

Originally Posted by Lemo

Flat and smooth!
https://www.aulro.com/afvb/images/im...017/07/508.jpg

---

Now for a coating??

Went away on the weekend towing my camper and nothing happened .
Been driving to and from work for weeks to months to years with other journeys and still nothing happened [tonguewink] Oh i do all my maintenance and checks in between [thumbsupbig]

Quote:

---

Originally Posted by rangieman

Went away on the weekend towing my camper and nothing happened .
Been driving to and from work for weeks to months to years with other journeys and still nothing happened [tonguewink] Oh i do all my maintenance and checks in between [thumbsupbig]

---

Well they can't all **** themselves Chris !

Be a little careful, remember what you used to say when JC mentioned Tdi head gaskets. [wink11]

Quote:

---

Originally Posted by rick130

Well they can't all **** themselves Chris !

---

Nope they cant [bigwhistle]
There has to be one or two good ones [wink11]

Quote:

---

Originally Posted by johntins

Now for a coating??

---

Yeah just need to slot the outer holes then off to the coater

Quote:

---

Originally Posted by rangieman

Went away on the weekend towing my camper and nothing happened .
Been driving to and from work for weeks to months to years with other journeys and still nothing happened [tonguewink] Oh i do all my maintenance and checks in between [thumbsupbig]

---

Bugger.
And there was I thinking that I had the ONLY reliable D2 on the road [bigwhistle]

Here are pics of the seconds battery and cables.

Attachment 126364

The SC80, mounted on a steel plate that is fitted to the battery hold down bolts.



Attachment 126363

The battery with stone guard on the SLS compressor shelf.

Attachment 126368

The cable heading to the rear, in split conduit. The round object to the left is the muffler.


Attachment 126370

Slightly more to the rear, cable tied to the part of the tow bar.

Attachment 126372

The rear of the Disco, with the Anderson Plug.

Attached a vacuum to my d2 exhaust pipe and used some water hose to my ear as a stethoscope to find my tick noise...as I thought rear exhaust manifold gasket. Then used my endoscope to see black area around gasket...took photo. Ordered new gaskets off Mario at Roverlord....keen to fit.https://www.aulro.com/afvb/images/im...017/07/511.jpg

Quote:

---

Originally Posted by trout1105

Bugger.
And there was I thinking that I had the ONLY reliable D2 on the road [bigwhistle]

---

Twins except mine is a manual oil burner[wink11]
So only one good Td5 manual and one good v8 auto[bigwhistle]

Quote:

---

Originally Posted by trout1105

Looking at that the TJM winch cradle is fitted to the same place the Crush Cans on my ARB winch bar is fitted to, So is the TJM bullbar fitted to the same points that the TJM winch cradle is fitted?

ARB mounting points
Attachment 126238
Attachment 126239

There is also plenty of room to remove the winch for servicing as well.
Attachment 126240

---

Mate here is mine. The winch cradle in the TJM mounts directly to the chassis aft of the TJM crush cans as do rated recovery points (mine has no cradle in....yet). Cheershttps://www.aulro.com/afvb/images/im...017/07/512.jpg