What happened to your Discovery 2 today?

Quote:

---

Originally Posted by rick130

I've been to Mundubbera this week but no one return waves a 2wd Hilux!!?? [emoji848]

---

Crikey Rick, I hope it has heavily tinted windows! [bigrolf]

Quote:

---

Originally Posted by Burto78

Today was just another day cruising to work only this time Rover & i were stopped for a RBT, then we were on our merry way again.
Rover patiently waited outside of work until we drove home full of anticipation about installing the treats that been delivered for her.
I also got a return rover salute from a fellow proud Disco 2 owner.
Happy days[biggrin]

Yes i'm new to this cult and am so far loving it!:twobeers:

---

Welcome to the forum Burto, may we enjoy your company for many happy years to come. [bigsmile1]

Quote:

---

Originally Posted by V8Ian

Crikey Rick, I hope it has heavily tinted windows! [bigrolf]

---

It's absolute habit, I see a Landy and the fingers and hand raise [emoji112]

Oh! so its only when you see a Landy you raise your fingers......[bighmmm][bighmmm]

Quote:

---

Originally Posted by discorevy

You want 3/8" unf for the prop shaft nuts , 9/16" is the spanner size

---

I hate this imperial ****. A 14mm nut and bolt is the same all over? No UNF BSW AF etc. or have I got that wrong?

Quote:

---

Originally Posted by Pedro_The_Swift

Oh! so its only when you see a Landy you raise your fingers......[bighmmm][bighmmm]

---

You raise your fingers, two of them, reverse Churchill style when you see the plod.

✌️ or [emoji112]

Quote:

---

Originally Posted by Bohica

I hate this imperial ****. A 14mm nut and bolt is the same all over? No UNF BSW AF etc. or have I got that wrong?

---

If a 14 mm bolt was the same all over it would be called threaded rod
14 mm head size is usually m10 x1.5 or m10 x1.25 , so 10 mm x 1.5 mm thread pitch

Quote:

---

Originally Posted by Bohica

I hate this imperial ****. A 14mm nut and bolt is the same all over? No UNF BSW AF etc. or have I got that wrong?

---

They are not 14mm and that might be the reason why you have stuffed the nut`s by using metric spanners [bighmmm]

Quote:

---

Originally Posted by rangieman

They are not 14mm and that might be the reason why you have stuffed the nut`s by using metric spanners [bighmmm]

---

I haven't stuffed the nuts. It's standard practice to use new nuts and bolts on this item, or have I got that wrong? I have a pair of 9/16 spanners. It is the multitude of different imperial sizes that gives me the irrites. The metric system is a whole lot more simpler.