Ooh an SD1... I'm still in the process of fixing mine. [emoji16]Quote:
Originally Posted by Epic_Dragon
Printable View
Ooh an SD1... I'm still in the process of fixing mine. [emoji16]Quote:
Originally Posted by Epic_Dragon
[emoji16] they are very cool cars. Dad has this one and a parts one with it. He has his rover half heartedly up for sale tooQuote:
Originally Posted by SPROVER
Finished off the EGR and cooler Delete
https://media.discordapp.net/attachm...810&height=610
Strangely now I seem to be surging at 2500RPM but only under hard acceleration (Overboost?)
Maf and MAP clean and now all is well.
Yep. Overboost. Must be right to the upper limit.Quote:
Originally Posted by DCOA
Odd timing on it but the MAP was pretty filthy, Maf wasn't much better. This rig also missing the airbox sensor which probably doesn't help.
Disconnected battery and cleaned both and it came good. Considering it has had EGR / Decat and middle muffler delete in the last week it mightve gone into shock at being able to breathe now.
Innovative coolant adding setup!
The other way is just to lift up the coolant reservoir above the bleed screw height so no extra gear needed. And park on a hill will nose up helps too.
Quote:
Originally Posted by DCOA
I've done all that before also and no matter what I get air in the heater core and hear sloshing so I just live with it at this point. [happycry]Quote:
Originally Posted by simonmelb
I want to put a bleed screw here... Dunno.
Attachment 189743
Ah I see you have a non original top hose setup so that’s probably the cause I assume.
Quote:
Originally Posted by DCOA
Bought some Ultraflex lights last November, threaded a couple of the screws removing the face plates when my shoulder was really bad. Now having a bit more strength / stability was able to remove them this morning and finally assemble them. Lots of screws and they were pretty average quality, had to get replacements yesterday for them.
130watts should provide a nice bright pathway and DRL's.
These now come with only a flat plate rather than a plate that required folding, makes install pretty straight forward but will have to wait for the batteries harness to be reassembled.
Attachment 189744
Attachment 189745
Attachment 189747
Have gone from a Optima Marine and Yellow, which was smaller than the Marine, to two Marines now so the original plates made to connect them up don't fit. That said it gives me two more posts to make it a bit prettier I hope. Looks an absolute mess at the moment.
Attachment 189746
